So I found out the hard way not to put more than 3 straps on a lock, took 20 minutes to undo. Does anyone know if they make locks with longer posts? Thanks
Do you use the standard magnet to unlock? I have/had issues with the Original keys being too weak to open the locks unless placed exactly right and the loch being fully untensioned.
I found a few 20kgf Neodymium magnets with an M5 stud to screw on handle at my local hardware store, they make opening the locks much less annoying.
Yes I use the standard magnet and have noticed the same thing that the magnet seems too weak and I have to line it up perfectly for it to open. Great idea using the neodymium magnet I will try that.
Indeed the manual says only to use three layers maximum, and sometimes it can be a PITA to open them.
The original Segufix green locks will be better for sure, regarding this.
If you encounter that issue again, a stronger magnet could potentially help, and pushing the black-button down, and then opening it, so it’s not under tension.
I’ve seen some custom made that are shorter, but I’ve never seen any longer.
Edit: other person said they can order in different lengths, but I don’t know where / what store sell them.
From segufix directly
Do you use the standard magnet to unlock? I have/had issues with the Original keys being too weak to open the locks unless placed exactly right and the loch being fully untensioned.
I found a few 20kgf Neodymium magnets with an M5 stud to screw on handle at my local hardware store, they make opening the locks much less annoying.
Yes I use the standard magnet and have noticed the same thing that the magnet seems too weak and I have to line it up perfectly for it to open. Great idea using the neodymium magnet I will try that.
Indeed the manual says only to use three layers maximum, and sometimes it can be a PITA to open them.
The original Segufix green locks will be better for sure, regarding this.
If you encounter that issue again, a stronger magnet could potentially help, and pushing the black-button down, and then opening it, so it’s not under tension.
I know I can order the pins in 25mm 28mm and 34mm…