Context: I'm setting up a modded Switch (Atmosphere/Hekate). I currently have zero games installed, so I am stuck in Applet Mode (Red text in Homebrew Launcher) and cannot use the "Title Override" method (holding R on a game) to get full RAM access yet.

The Problem: I am trying to install my first title to break out of Applet Mode, but I'm facing a Catch-22 situation:

1. DBI MTP Installer Issues: When I try to install a game (Super Mario Bros U Deluxe, ~7GB) via DBI MTP Responder -> "MicroSD Install", the transfer starts but speeds drop drastically and eventually the transfer aborts/times out.
   • Suspected cause: Applet Mode memory constraints causing buffer saturation and USB timeout.
   • Action taken: I tried installing a very small file (Tinfoil Self Installer NSP, ~few MB) to bypass the buffer issue. The MTP transfer still aborted.
2. Workaround Attempt:
   • I manually copied the Tinfoil.nsp to the SD card root (via 1: SD Card in DBI MTP).
   • I installed it successfully using DBI's "Browse SD Card" option on the Switch itself.
   • Result: The icon appears on the Home Menu.
3. The Crash & Signature Error:
   • When I try to launch the installed Tinfoil app from the Home Menu, it immediately crashes: "The software was closed because an error occurred."
   • Looking at the DBI logs from previous failed install attempts, I see the error: [SIGNATURE: Fake].

My Setup & Diagnostics:

• Console: V1 Erista / Mariko (según corresponda, si no sabes pon "Switch LCD").
• CFW: Latest Atmosphere & Hekate.
• Connection: USB-C to PC (Port verified working, back I/O panel).
• SD Card: Verified, plenty of space.

The Question: I suspect I am missing valid Sigpatches. I just downloaded a file named Hekate+AMS-package3-sigpatches-1.10.1P-cfw-2.1.0_V0.zip.

Is simply dragging and dropping the contents of this zip (atmosphere, bootloader folders) to the SD root enough to fix the crash and allow me to open Tinfoil? Or do I need to re-inject a specific payload (Fusee vs Hekate) to make sure the patches are applied?

I just need to get one app running to access Full RAM mode and install the rest normally. Thanks!