You call that a leak??? Really??? My 25 year old tractor lunched a pulley/bearing assembly on the hitch for the snowblower. Wisconsin, can’t be without. Just spent 2 hours + on the garage floor. For reference it’s 12 fucking degrees. If that “leak” was my problem? I’d wrap it with a 1/2 dozen “Tube-O-Towels” and a couple of zip ties. What happened to this sub??? I came into thaw, and get some laughs from my favorite sub, and I get “oh me!!! I have a little exhaust leak, whatever can I do?!?!?”T-O-T and ZTs. Send it.
Jb weld to the rescue
Real shit tho. Jokes aside tho. Id totally repair this with jb weld real shit
I'd just use some straight clay from outside. Don't even need to buy that shit
Be clear, do I use real human shit or jb weld or are we we talking horse manure here
Just whatever you find lying around the house
Crafty panda fixed this with ramen noodles
Have you tried applying more rust? Obviously some is missing.
What’s the problem? It is exhausting air in multiple spots. Keep driving.
Looks like a great use for paper mache
All ready looks like paper maché.
Hubba bubba? Duct tape could work as well
Pack it with Big League Chew.
1000 Interwebs points for Big League Chew reference!
Lots of press and seal and little duct tape
Duct tape.
Expansion foam and duct tape, that way it won't leak around the edges of the duct tape
You call that a leak??? Really??? My 25 year old tractor lunched a pulley/bearing assembly on the hitch for the snowblower. Wisconsin, can’t be without. Just spent 2 hours + on the garage floor. For reference it’s 12 fucking degrees. If that “leak” was my problem? I’d wrap it with a 1/2 dozen “Tube-O-Towels” and a couple of zip ties. What happened to this sub??? I came into thaw, and get some laughs from my favorite sub, and I get “oh me!!! I have a little exhaust leak, whatever can I do?!?!?”T-O-T and ZTs. Send it.
It’s fine if your exhaust leaks out- you don’t actually need it
Muffler putty some aluminum foil and a thick band clamp.
Bycicle tube straps, just wrap It tightly and make a nice knot at the end
Technically, it is doing its job
Try belzona
If you can weld, try a wide weld, keeping in mind that the material which is left is probably thin.
I thought loud pipes save lives?
Ramen, epoxy, sandpaper
Flex seal
Nah sounds great and the fumes are awesome
Chewing gum will handle that.
Fuck it. Straight pipe.
Bondo
Best Practice...Beer cans, bailing wire and a good dose of JB Weld..Full Send..
Bubble gum will work with a little duct tape for support
Patch? There's nothing there to patch to.
Wrong sub again. This is the sub for wrong advice only.
This is when you take the opportunity to give them bad, humorous advice, grampy